A hammer is a tool that delivers an impact to an object. The most common uses for hammers are to drive nails, fit parts, forge metal, and break apart objects. Hammers often serve a specific purpose, and vary in shape and structure. The term "hammer" also applies to some devices that deliver blows, e.g., the caplock mechanism of firearms.

The hammer is a basic tool of many professions. The usual features are a handle and a head, with most of the weight in the head. The basic design is hand-operated, but there are also many mechanically operated models, such as steam hammers, for heavier uses.

Read more on Wikipedia

Guías que contienen

Drilling holes in car bodywork

Drilling one or more holes in the car body is necessary for fitting extras such as an aerial, win...

Remoción de los rulemanes de la rueda

Los rulemanes de la rueda que no es de tracción (los rulemanes de la rueda delantera en los auto...

Replacing wheel bearings on driven wheels

Driven wheels - independent suspension Cars with front-wheel drive have front-wheel bearings that...

Resorte regulador de repuesto

Si tiene que reemplazar un resorte regulador en la suspensión delantera, éste tiene que ser de l...

Renewing MacPherson-strut inserts

When the damper inside a MacPherson strut wears out, you can buy a replacement cartridge which —...

Replacing track-rod-end ball joints

Track-rod-end ball joints are not adjustable on later cars. If they wear, you must replace them....

Sustitución del engranaje Bendix

El nombre engranaje Bendix se aplica estrictamente al mecanismo de accionamiento espiral de un mo...

Comprobación y sustitución de un transmisor de combustible

Si el indicador de combustible marca vacío y usted sabe que hay combustible en el depósito, la c...

Ajuste de los rulemanes de las ruedas

Los rulemanes de las ruedas necesitan un control periódico (y ajuste de ser necesario) cada 20.0...

Replacing starter or dynamo bearings

Starter-motor bearings are usually bushes made of graphite-bronze. A few starters - especially h...

Servicing a mechanical fuel pump

Remove the top of the pump first. It is held on by a central bolt or screw, except on...

How to replace an exhaust

A damaged or worn exhaust system allows waste gases from the engine to escape before they have p...

Changing an oil filter

Fitting a cartridge-type filter Fitting a new disposable cartridge is a simple task, but you mus...

Replacing a car door

As well as replacing a door because it has become rusted or been damaged in an accident, you may...

Overhauling a Bosch distributor

Bosch distributors are found on many different cars and are generally very reliable. But after a...

Repairing quarterlights

Quarterlights are now rarely fitted by manufacturers so you mostly find them on older cars. It i...

Replacing rear quarterlights

Rear quarterlights are found behind the rear passenger doors on a four-or five-door car or behind...